Light Bulb Camera, SYMYNELEC 360 Degree Pan/Tilt Panoramic IP Security Camera, 2.4GHz WiFi 1080P Smart Home Surveillance Cam with Motion Detection Alarm Night Vision Two Way Talk Indoor Outdoor E27 Tools & Home Improvement
SYMYNELEC 360 Degree Pan/Tilt/Zoom Light Bulb Security Camera 2.4GHz WiFi
SETUP NOTE: ONLY Works with 2.4GHz Wi-Fi networks, does not support 5GHz Wi-Fi
COMMON Q & A
Q: Can’t turn on the power? The camera does not work. Indicator light not blinking?
A: Bulb cameras do not have batteries, you need to install them into the light socket and power up the socket. When you power it on, wait a minute, the bulb camera will rotate and self-test, indicating that it can work properly. Please be aware that the status light will not flash, this is normal.
Q: Won’t connect to the internet/wifi/network?
A: 1. Please ensure that the bulb camera can be powered on and self-tested properly. 2. Please install it close to the router, the camera requires a strong WiFi signal. 3. Please ensure that your WiFi information is entered correctly. 4. Please reset the bulb camera, it will take longer to set up the first time.
Q: Why can’t my phone receive alert notifications?
A: 1. Please make sure you have turned on the motion detection alert switch and set the appropriate alarm sensitivity. 2. Please make sure your phone system permissions allow our apps to perform message push. 3. Please confirm to open the message push settings in the App, open the App, click Me→ Message Center, click the button in the upper right, and enable notifications. 4. Alarm interval 1-3-5 minutes, which means only one alarm can sound during the period.
Q: Micro SD memory card requirements?
A: 1. Only FAT32 format is supported. 2. Maximum memory capacity: 128GB. 3. Micro SD memory card size: 1.5 x 1.1 cm. 4. Micro SD card not included.
Q: Display ofﬂine?
A: 1. Confirm whether there is a power failure from the router or network disconnection, if so, it takes a while for the router to restore the network, check again after 2 minutes if the device is back online. 2. Ensure the router has been replaced or the WiFi name, password, etc. have been modified, if so, the device needs to be removed and re-added. 3. Check whether the firmware is the latest version, App side check path: Home – click the device icon – click the top right button – check for updates. 4. If the device appears ofﬂine after using for a period of time, but after restarting the router or rewiring the device, the device is back to normal, it means that the router is overloaded due to long-term high load use, you need to replace a router with a stronger load capacity or reduce the number of devices connected to the router. 5. Remove the device from the app and then reset the bulb camera by inserting a long pin into the reset hole. Wait for the self-test to complete and then go to pair and connect the camera again.
360 Degree Bulb Security Camera 5GHz Light Bulb Camera PTZ Bulb Security Camera 2K 4MP Outdoor Light Bulb Camera Resolution 1080P Full HD / 30 fps 1080P Full HD / 30 fps 1080P Full HD / 30 fps 2K 4MP Full HD / 30 fps Night Vision 33ft (10m) 33ft (10m) 33ft (10m) 60ft (20m) Network Connection WiFi (2.4GHz Only) WiFi (5GHz 2.4GHz) WiFi (2.4GHz Only) WiFi (2.4GHz Only) Storage Options Cloud & Micro SD Card (Not Included) Cloud & Micro SD Card (Not Included) Cloud & Micro SD Card (Not Included) Cloud & Micro SD Card (Not Included) View Pan:355°Tilt: 120° Pan:355°Tilt: 120° Pan:355°Tilt: 120° Pan:355°Tilt: 120° Socket E27 Bulb Base E27 Bulb Base E27 Bulb Base Bulb Base Socket Additional Features 2-Way Talk/Smart/Real-time Alerts/Motion Detection 2-Way Talk/Smart/Real-time Alerts/Motion Detection 2-Way Talk/Smart/Real-time Alerts/Motion Detection 2-Way Talk/Smart/Real-time Alerts/Human Motion Detection 5GHz WiFi Support X ✓ X X Waterproof Level Non-waterproof, Water Resistant Non-waterproof, Water Resistant Non-waterproof, Water Resistant IP65 Waterproof, Water Resistant